30 Eylül 2009 Çarşamba
29 Eylül 2009 Salı
AutoCAD Inventor LT Suite - BIM Ready Content from Inventor LT
Inventor yazılımında Revit MEP içeriği oluşturmayı anlatan güzel bir video
24 Eylül 2009 Perşembe
15 Eylül 2009 Salı
AutoCAD MEP 2010 Update 1
The following defects have been fixed in AutoCAD MEP 2010 Update 1:
Duct
- Duct Flanges are displayed incorrectly after moving a duct using grips.
- Velocity in Duct Modify does not match the Velocity in the Properties Palette.
- Add Selected does not work correctly when duct height is greater than duct width.
- Takeoff for branch is not sized correctly when duct height is greater than duct width.
- Top and Bottom Elevation are incorrect in tooltip when duct height is greater than duct width.
Electrical
- A crash may occur when closing a drawing with an EPD file that has a relative path.
- A crash may occur when converting multiple blocks to Devices.
- Wire will only connect to one connector on some scaled devices.
- Device modify via grip edit doesn't move or maintain its orientation as expected.
- The Add Automatic Property for a Device was not retrieving the Load Category or Number of Poles.
Pipe
- The formula for percentage slope by angle is incorrect. Fixing this means that an existing tool in which a specific number for percentage is stored will produce a different slope due to the new calculation.
- Pipe layouts with Very low slope cannot be created correctly.
- The Parallel Pipe command places new pipes on the wrong layer when systems use different layers.
- Some Pipe created in previous versions of AutoCAD MEP snaps to fittings when opened.
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=13868521&linkID=9240938
10 Eylül 2009 Perşembe
RME Duct Sizing Calculation
Revit MEP Kanal Çaplandırma Hesaplamasını linkteki dosyada bulabilirsiniz...
Download RME_Calc_Duct_Sizing
Download RME_Calc_Duct_Sizing
RME Hydronic Piping
Revit MEP Hydronic Boru Çalplandırması için uyguladığı methodu linkte bulabilirsiniz...
Kaydol:
Kayıtlar (Atom)